Description:
DURAVIS PPV-A-PL1500 Series Electropneumatic Valve Positioner provides the proportional control of the pneumatic diaphragm valve and pneumatic piston valve with 4-20mA or 0-10V input signal. Thanks to its compact design, it is easy to set with simple keypads. The position sensor detects the position at a fast and high accuracy level and adjusts the valve position quickly.
Model No / Order Coding:
| Model | Feedback Signal | ValveStroke |
|---|
| PPV-A-PL1500-1-S-1 |
None |
5 - 30 mm |
| PPV-A-PL1500-1-S-2 |
None |
30 - 50 mm |
| PPV-A-PL1500-2-S-1 |
4 - 20 mA |
5 - 30 mm |
| PPV-A-PL1500-2-S-2 |
4 - 20 mA |
30 - 50 mm |
!Warning: The use of the positioner is only suitable for the models with a valve actuator diameter of 63mm and larger.
Technical Features:
Material: PC, PA6-GF30, SI | Supply Voltage: 24V DC ±10% | Ambient Temperature: 0-55°C | Enclosure: IP65
Electrical Input: 4 – 20 mA | Input Resistance For Setpoint Signal: 14 ohm
Air Supply Pressure: 3...7 bar | Pneumatic Connection: G 1/4"
Electrical Connection: M12 3-pins B-koded (Cable ø 4-6mm) | M12 4-pins D-koded (Cable ø 4-6mm)
Power Consumption: <5W | Installation: As required but preferably with actuator in upright position.
Output On Request; 4-20mA
Electrical Connection:
X3(D coded | Electrical Input Signals)
Pin1........Input Signal 24V (+)
Pin2........Input Signal 24V (-)
Pin3........Input Set Signal 4-20mA (+)
Pin4........Input Set Signal 4-20mA (-)
X2(C coded | Electrical Output Signals) (Optional*)
Pin1........Output 4-20mA (+)
Pin3........Input 4-20mA (-)
Pin4........Normally Closed
Pneumatic Connection:
P.............Air Supply Output
R.............Air Exhaust Output
C.............Check Valve
A1............Pilot Air Output
Usage:
This positioners are used to control pneumatic piston valves and pneumatic diaphragm valves when proportional control is required with 4-20mA or 0-10V input signal and when any position feedback is required.