DURAVIS ESV 606 Series SS Solenoid Valves
(1/8"-1/4", Direct Op.)-3 Ways
Usage:
Acids, Aggressive Fluids etc.
Way : 3/2 ways
Position : N.O
Seal : PTFE
Body : Stainless Steel
Coil : 220/110/24/12 VAC, 24/12 VDC
|
|
Açýklama:
USKON as a manufacturer of stainless steel solenoid valves; presents a wide variety of solenoid valve technology to meet your valve requirements under its registered trademark DURAVIS. ESV 606 series are available as 1/8" and 1/4" sizes. Several materials are available including 304 Stainless Steel, 316 Stainless Steel, PTFE in these series. Typically fitted with an PTFE seal as standard. According to the desired flow rate; orifice options are offered as 1mm, 1,8mm, 2,5mm. It should be noted that as the diameter of the orifice increases, the maximum pressure of the valve will decrease.
In the series of direct-acting ESV 606 Series, which does not require any differential pressure when the coil is not energized and flow enters the body (port 1), fluid directly flow through to exhaust port(3). When the coil is energized, the input port (1) and the body output port (2) are open. Therefore, the direction of this valve flow acts like a diverter valve.
Model No / Order Coding:
| Model | Way | Connection Size (G) | Orifice Size | Min Pressure AC
(bar) | Max Pressure AC
(bar) | Min Pressure DC
(bar) | Max Pressure DC
(bar) | Seal |
|---|
| ESV 606-00-010 |
3/2 |
1/8" (DN6) |
1 mm |
0 |
16 |
0 |
16 |
PTFE |
| ESV 606-00-018 |
3/2 |
1/8" (DN6) |
1,8 mm |
0 |
10 |
0 |
10 |
PTFE |
| ESV 606-00-025 |
3/2 |
1/8" (DN6) |
2,5 mm |
0 |
6 |
0 |
6 |
PTFE |
| ESV 606-01-010 |
3/2 |
1/4" (DN8) |
1 mm |
0 |
16 |
0 |
16 |
PTFE |
| ESV 606-01-018 |
3/2 |
1/4" (DN8) |
1,8 mm |
0 |
10 |
0 |
10 |
PTFE |
| ESV 606-01-025 |
3/2 |
1/4" (DN8) |
2,5 mm |
0 |
6 |
0 |
6 |
PTFE |
*When you order, please do not specify the coil voltage! (230/110/48/24/12 AC or DC)
Technical Features (DURAVIS ESV 606 Series 3 Way Direct Operated Stainless Steel Solenoid Valves)
Application: Air, Water, Gases and Non-aggressive liquids etc.
Size: 1/8" and 1/4" BSP (Optional: NPT)
Pressure: 0 bar...16 bar
Armature: Stainless Steel
Body: AISI 304 / 316 Stainless Steel
Seal: PTFE
Temperature: -10°C…160°C
Position: Normally Open 3/2 Way
Voltage: 230, 110, 48, 24, 12V AC or DC
Enclosure: IP65
Usage: Compressed Air, Main Water Systems, Vacuum, Argon, Helium, Oxygen, Nitrogen, Process Water, Pure Water, Demineralised Water, RO Water, Sodium Hydroxide, Light Oils, Steam, Diesel, Petrol, Final Effluent, Aviation Fuels and basically any non or slightly aggressive or corrosive liquid or gas media and environment etc.
|
|